FAQs
How can I calculate how long the power station will power my device?
You can check the run time remaining on the LCD Screen. This can help you estimate the charging time of your devices and appliances while in use.
To calculate the run time of a device before use, the formula below may be used:
Power Station Capacity × Depth of Discharge × Inverter Efficiency) ÷ Device Rated Power
In this calculation we will use the B660 SST (602Wh) and a CPAP machine requiring 60W of power.
The calculation is (602Wh x 0.95 x 0.9) ÷ 60W = 8.6
So in this case, the B660 SST will power the CPAP machine for 8.6 hours
How can I tell the power station is charging?
When the power station is connected to either AC, DC, or solar input, the remaining time to full charge will display on the LCD screen. Also, the input wattage will be displayed and green icon will animate to showing charging is occurring.
Can the power station charge and discharge at the same time?
Yes, the power station can charge and discharge at the same time.
Does the power station have a cooling fan(s)?
Yes, the power station has a fan(s) that will automatically turn on to keep the unit from overheating.
How do I know if the product is charging?
When the product is charging, the charging indicator icon will flash, and the remaining time will be shown on the LCD screen.
How do I clean the product?
Use a soft dry towel to wipe gently across all surfaces.
How do I store the product?
If your portable power station is not going to be used for extended periods of time, power off the unit and disconnect the AC adapter from the outlet. Store it in a safe dry place with a temperature of 32-104°F / 0-40°C and humidity within 90%. Every 3-6 months charge the product to at least 80% to protect its battery life.
Why is there no AC output on my B4000 SST?
The circuit breaker switch to the left of the 30A RV Outlet must be in the “On” position.